News

  • 9 points for attention in mold polishing

    9 points for attention in mold polishing

    1) When a new mold cavity starts to be processed, the surface of the work piece should be inspected first, and the surface should be cleaned with kerosene so that the oil stone surface will not stick to dirt and lose its cutting function. 2) When researching coarse grains, the order of difficulty is... read more

    May 29,2020 News
  • Four tips for choosing plastic mold materials

    Four tips for choosing plastic mold materials

    1. Good thermal stability The shape of plastic injection mold parts is often more complicated and difficult to process after quenching, so it should be selected as far as possible with good thermal stability. When the mold forming process is heat treated, the linear expansion coefficient is small, t... read more

    Jun 04,2020 News
  • What should be paid attention to when processing plastic molds

    What should be paid attention to when processing plastic molds

    Since the mold is developing in the direction of large-scale, molds of several tons to tens of tons are very common, so the worktable of the machine tool is required to bear a large weight, which requires the equipment to have the characteristics of large load-bearing and high rigidity. 1. The multi... read more

    Jun 11,2020 News
  • Six common polishing methods for plastic molds

    Six common polishing methods for plastic molds

    There are two main purposes for polishing the mold. One is to increase the brightness and beauty of the plastic mold. The second is to make the mold easy to demold. When polishing, generally use a coarse whetstone to roughen the surface of the machined mold cavity, and then grind away the marks of t... read more

    Jun 18,2020 News
  • Plastic mold injection molding should meet six major conditions

    Plastic mold injection molding should meet six major conditions

    In order to let the plastic mold be damaged or abnormal after injection molding, we need to perform certain specifications on the mold injection molding, and its main requirements meet the following six conditions: 1. Turn off the mold pressure: in principle, it should be greater than the total pres... read more

    Jul 01,2020 News