News

  • Three development trends of the automotive mold industry

    Three development trends of the automotive mold industry

    The simulation of the stamping process (CAE) is more prominent In recent years, with the rapid development of computer software and hardware, the simulation technology of stamping process (CAE) has played an increasingly important role. In the developed countries such as the United States, Japan, an... read more

    Apr 10,2020 News
  • The gap of mold life depends on the following five factors

    The gap of mold life depends on the following five factors

    1.The quality of die steel is unstable Die steel has many quality problems and unstable quality. The same type of forging has good performance for a period of time and poor performance for a period of time. Frequent replacement of Injection Molds by enterprises has also caused problems for enterpris... read more

    Apr 15,2020 News
  • What kind of materials are used in car molds?

    What kind of materials are used in car molds?

    According to the service life requirements of automobile cold punching molds: under normal use and maintenance, 500,000 qualified parts can be produced in multiple batches and small batches. Therefore, the performance and quality of the mold material have a great influence on the service life of the... read more

    Apr 27,2020 News
  • How to maintain the Plastic mould surface.

    How to maintain the Plastic mould surface.

    The used Plastic mould has residues, scales, oil stains, etc. during dePlastic moulding, which must be carefully removed. Different cleaning methods can be used according to different plastics. Usually, use cotton wool dipped in alcohol or weak alkaline solution, such as soapy water to wipe the rema... read more

    May 14,2020 News
  • How to solve the three major causes of poor adhesion of plastic mold plating?

    How to solve the three major causes of poor adhesion of plastic mold plating?

    Plastic mold plating is usually carried out by multilayer plating. If the operation is not strict, poor adhesion may occur, such as blistering and peeling of the coating. The reason is not only the following three main types of influence. (1) Influence of electroplating process: improper combination... read more

    May 23,2020 News